B6500 User’s Guide> 44
NOTE
> If there are no paper trays that match the automatic tray
selection, an error message prompting for replenishment
of paper will be displayed. You can configure the printer
not to display this message but to automatically select a
nearest or larger paper size of the document for printing.
(Substitute Tray)
> If paper runs out during printing, a paper tray containing
paper of the same size and orientation of the paper used
for printing will be selected to continue printing
(automatic tray switching).
> If there are no paper trays that match the paper types
that are set for [Specify Paper Type], a message
prompting to confirm printing on another paper type will
be displayed. Press the <FEED/SELECT> button to print
on paper of another type or press <CANCEL> to cancel
the job.
Refer to:
• Specify Paper Type: Online Help for the printer driver
Setting Custom Paper Sizes
To print on custom size paper loaded in trays 1 to 4, you must set
the paper size on the control panel.
You may also need to set it on the printer driver, depending on the
paper size.
This section explains how to set the size on the control panel.
Important:
• When setting the paper size on the printer driver and control
panel, be sure to specify the same size as the actual paper
used. Setting the wrong size for printing will cause machine
failure. This is especially true if you configure a bigger size
when using a narrow width paper.
NOTE
> To return to standard paper size settings, select [Auto] in
step below. This printer will automatically detect the size
and orientation of the loaded paper.
1. Press the <MENU> button to display the Menu screen.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
