B6500 User’s Guide> 22
• Transparencies with white frames or full-color transparencies
cannot be used.
The way to load transparencies in the paper tray is the same as the
way to load standard size paper. For details, refer to “ Loading
Paper” (P. 41).
You must also set paper type for the paper tray to [Transparency]
on the control panel.
Refer to “ Setting Paper Types” (P. 45) to change the setting.
Printing on Transparencies
To print on transparencies, click on [Properties] from the [File]
[Print] menu, click the [Setup] tab. This section explains the
procedure using WordPad on Windows XP as an example.
NOTE
> The way to display the printer properties dialog box differs
according to the application software. Refer to the manual
of your respective application software.
> Printing transparencies continuously may lead to the
output transparencies sticking to each other. As a guide,
remove the transparencies from the output tray after
about 20 sheets and then fan them to lower their
temperatures.
1. From the [File] menu, select [Print].
2. Select this printer as the printer to be used and click
[Preferences].
3. Click the Media Type drop down box and click on
transparencies.
4. Select the loaded paper tray from Source Drop down and
click on the tray that contains the transparencies.
5. Click the Paper Size drop down.
6. From [Paper Size], select the size of the original document.
7. Click [OK].
8. Click [Print] in the [Print] dialog box to start printing.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
