B930n User’s Guide> 106
M
AINTENANCE
C
LEANING
THE
P
RINTER
This section describes how to clean the printer in order to maintain
the printer in good condition.
CAUTION
> CAUTION: Be sure to switch off and unplug the machine
before accessing the interior of the machine for
cleaning, maintenance, or fault clearance. Access to a
live machine’s interior can cause electric shock.
C
LEANING
THE
EXTERIOR
Clean the exterior of the printer about once a month. Wipe the
surface with a damp, well-wrung soft cloth. Then wipe with another
dry soft cloth. For stubborn stains, moisten a soft cloth with a small
amount of neutral detergent, and gently wipe the stain off.
NOTE
> Do not spray the detergent directly on the printer. The
liquid detergent may enter the printer through a gap and
cause problems. Never use cleaning agents other than
neutral detergent.
C
LEANING
THE
INTERIOR
After clearing paper jams or replacing the Toner Cartridge, inspect
the interior of the printer before closing the top cover
CAUTION
To Next Page
Loading...
Need help?
General
