B930n User’s Guide> 72
The network printer supports TCP/IP protocol that can be used in
conjunction with the Windows operating system.
Once the printer registered on the Windows NT 4.0/Windows 2000/
Windows XP/Windows Server 2003 computer is shared, you can also
print from Windows 95/Windows 98/Windows Me computers
through this printer.
INSTALLATION OF TCP/IP PROTOCOL
There are a number of options available when printing using TCP/IP
for Windows. The following table lists the options:
1
These functions are built into Windows and are displayed as options
when using the Add Printer Wizard.
Although there are some differences in configuration options
between the various Windows platforms, the procedure for printing
using TCP/IP is the same.
1. Ensure that the TCP/IP protocol has been installed in
Windows. This can be confirmed by checking the network
settings from within the Operator Panel. If TCP/IP has not
WINDOWS VERSION METHOD
95/98/Me OKI LPR Utility
NT 4.0 OKI LPR Utility
Microsoft LPR
1
2000/XP/Vista OKI LPR Utility
Microsoft LPR
1
Port 9100
1
LPD or Port 9100 (TCP/IP)
To Next Page
Loading...
Need help?
General
