B930n User’s Guide> 43
• Insert Small postcards short-edge feed and facedown.
Place the top of the postcard toward the rear of the printer.
2. Adjust the paper guides to the size of the postcards.
3. Change media type at Operator Panel via the Paper Menu’s
Media Type selection.
4. Select Postcard as the Media Type in the Media Type
pulldown.
5. Click OK.
L
ABELS
Labels can be printed from all trays. Read the following guidelines
before printing Postcards.
• Do not use vinyl labels
• Do not use any labels on a sheet where items are missing; it
may damage the printer.
• Print only on one side of the sheet of labels.
• Make sure that postcards are stored in a cool dry place and in
their original packaging, if possible. Storing them in extreme
conditions can cause jams, curls, or poor print quality.
Loading and Printing
1. Insert the postcards in the tray with the following
considerations:
• Tray MPF - Insert the label sheets long-edge feed and
facedown. Place the top of the page toward the front of the
printer.
Large Postcards
Long-edge
Small Postcards
Short-edge
To Next Page
Loading...
Need help?
General
