B930n User’s Guide> 192
7. Seat the Hard Drive over the locating pins and push firmly to
seat the unit.
8. Reinstall the side covers in reverse order.
9. Connect the power cord to the wall outlet.Turn the printer
power switch to the ON [I] position.
I
NSTALLING
THE
M
EMORY
O
PTION
AND
C
OMPACT
F
LASH
1. Ensure that the printer power switch is set to the OFF [O]
position.
2. Disconnect the power cord from the printer.
3. Remove side cover from printer.
ADD
NEW GRAPHIC
To Next Page
Loading...
Need help?
General
