B930n User’s Guide> 40
• Remove all other media before loading transparencies into
the tray.
• Do not load transparencies above the fill line; this may cause
the printer to jam
• Handle transparencies by the edges to avoid fingerprints and
creases that can cause poor print quality.
• Do not use transparencies with stripes down the side.
• Change the Media type via the Operator Panel or by selecting
the Media type from your Printer Properties Paper Options
Loading Transparencies
1. Fan the transparencies to release sheet that may stick
together.
2. Insert them with long-edge feed.
NOTE
> Do not load paper above the fill line.
3. Adjust the paper guide to the size of the transparencies, if
necessary.
4. Change media type at Operator Panel via the Paper Menu’s
Media Type selection.
Tray 5 Trays 1-4
To Next Page
Loading...
Need help?
General
