B930n User’s Guide> 53
The most convenient way to enable this feature is by using your
Printer Properties. You may also enable this feature at the Operator
Panel or by using the EWS.
To turn stapling on through your Printer Properties:
1. Select the Paper Feed button in the Setup tab within your
Printer Properties.
The Paper Feed Options window appears.
2. Select the desired Stapling type from the Staple pulldown.
3. Click OK.
4. Click OK.
Adding Staples
1. Open Door G.
NOTE
> See instructions on the inside of door G.
2. Slide the stapler toward you, then to the right.
To Next Page
Loading...
Need help?
General
