B930n User’s Guide> 64
2. Click Timed Job.
3. Click Set Time.
4. Enter the elapsed time or real desired.
For elapsed time, specify the number of minutes to delay
before printing. For real time, enter actual date parameters.
5. Click OK.
6. Enter a job name and PIN number.
A PIN number is only needed to cancel a timed job.
7. Click OK.
You can cancel a timed job from the Operator Panel without waiting
for the specified time.
To cancel a timed job:
1. At the Operator Panel, press the Menu button.
Print Jobs is displayed.
2. Press the Forward (right) key.
You are requested to enter a pin number.
3. Use the Next and Previous buttons to change a digit.
4. Press Forward (right) key to enter the digit.
5. Repeat steps 3-4 until all Digits are entered.
6. Press Select.
7. Use Next to until the document is displayed.
8. Press Select.
9. To delete the job, press the Cancel Button. To Print the press
the Forward (right) key
You are asked for the number of copies to print.
10. Use Next to enter the number of copies.
11. Press Select.
The job is printed or deleted as instructed.
To Next Page
Loading...
Need help?
General
