B930n User’s Guide> 93
> The system default is used if no parameter is specified.
> If the print data specifies 2 sided or 1 sided printing, the
specification by the data becomes valid and overrides that
by -C option.
Specifying Collation
The following parameter can be specified:
NOTE
> For some print language, the specification may be invalid.
Specifying Color and Print Modes
The following color and print mode parameters can be specified:
NOTE
> If several parameters are specified in one "lpr" command,
data may not be printed.
> For some print language, the specification may be invalid.
> The system default is used if no parameter is specified.
> The color setting is not available on this printer.
PARAMETER DESCRIPTION
COLLATE/collate Sorts prints electronically.
PARAMETER DESCRIPTION
CC/cc Selects color for color mode and quality
priority for print mode.
CB/cb Selects color for color mode and speed
priority for print mode.
GC/gc Selects monochrome for color mode
and quality priority for
GB/gb Selects monochrome for color mode
and speed priority for
AC/ac Selects auto (color/monochrome) for
color mode and quality
AB/ab Selects auto (color/monochrome) for
color mode and speed
To Next Page
Loading...
Need help?
General
