43 - C110 User’s Guide
Media Storage
" Keep media on a flat, level surface in its original wrapper until it is time to
load it.
Media that has been stored for a long time out of its packaging may dry up
too much and cause misfeeding.
" If media has been removed from its wrapper, place it in its original
packaging and store in a cool, dark place on a level surface.
" Avoid moisture, excessive humidity, direct sunlight, excessive heat (above
35°C [95°F]), and dust.
" Avoid leaning against other objects or placing it in an upright position.
Before using stored media, do a trial printing and check print quality.
To Next Page
Loading...
