- 124 -
5. Management / Setting the Printer
• Print From USB Memory Setup
Set Print From USB Memory.
•Print Setup
• Management
You can set device settings.
• User Install
• If [Auto] is selected for Time Setup, the time cannot be set from the operator panel.
• Job List
This function is displayed only if you log in as the administrator of the machine.
• Direct Print
Maintenance Reset/Restore Restarts and resets a network. Even if you access the Web page
from the Web browser after restarting, the Web page is not displayed
until the restart is complete. Resetting restores the IP address to its
default status, resulting in information you manually set being lost. In
such a case, the Web page cannot be displayed.
Network Scale Improves operation efficiency on a network. This setting is very
effective when a hub that has the spanning tree function is used, or a
computer and the machine are connected one-on-one with a cross
cable.
Item Description
Default Settings Sets default settings when printing from USB Memory.
Item Description
Print Menu Print Setup Sets the number of copies, resolution, and other settings. When
using the printer driver, the values that are set with the printer driver
are given priority over these settings.
Printer Adjust Sets manual timeout, jam recovery, and other print adjustment
settings.
Print Position Adjust Adjusts front X, front Y, back X and back Y positions.
Drum Cleaning Sets cleaning of an image drum.
Hex Dump Displays all the received print data in hex. To exit this mode, restart
the machine.
Color Menu Sets Color settings.
System Configuration Menu Sets operation modes, alarm release, and other machine operation
settings for each situation.
Emulation PCL Setup Sets PCL.
PS Setup Sets PS.
IBM PPR Setup Sets IBM PPR Setup.
EPSON FX Setup Sets EPSON FX Setup.
Item Description
Local Interface USB Menu Sets USB.
Access Control Setup Sets user authentication and access control.
System Setup Sets display units and other settings.
Item Description
Power Save Sets power save settings.
Language Maintenance Setup Sets Language settings.
Font Setup Sets the output mode for fonts.
Admin Password Sets an administrator password.
Reset Settings Initializes all the data that is set in "Management".
Item Description
Power Setup Sets Auto power off and Power supply Return.
Time Setup Sets the time to the machine.
Other Settings Sets other settings.
Item Description
Job List Displays a list of print jobs that are sent to the machine. You can
delete unnecessary jobs.
Item Description
Web Printing Specifies and prints a PDF file.
Item Description
To Next Page
Loading...
Need help?
General
