- 82 -
5. Management / Setting the Printer
•Buzzer Setup
•Time Setup
*1 : Factory default setting values are different according to the country or region.
•Power Setup
• Tray Setup
*1 : Factory default setting values are different according to the country or region.
•Others Setup
Panel Contrast 0 Adjusts the contrast of the LCD of operation panel.
Touch Key Calibration Execute Adjusts the sensitivity of the touch keys. Do not operate
during the calibration.
Item Factory Default Description
Key Touch Tone Volume Low Sets the buzzer volume of the key-touch tone.
Error Volume Off Sets the buzzer volume when error occurred.
Print Completion Buzzer Volume Off Set the buzzer volume when print complete.
AirPrint Buzzer Volume Low Sets the buzzer volume when the AirPrint confirmation
operation.
Card Hold Buzzer Volume Low Set the buzzer volume to be heard when holding IC Card
over card reader.
Item Factory Default Description
Date Format dd/mm/yyyy or mm/
dd/yyyy *
1
Sets the date display format.
Time Zone +00:00 Sets the time zone (difference from GMT).
Available range: -12:00 to +13:00 (15 minutes /
increment)
Daylight Saving Off Sets whether to enable the Daylight Saving mode.
Setting method Manual Setup Sets the time setup method.
SNTP Server (Primary) ************ Sets the primary SNTP server.
SNTP Server (Secondary) ************ Sets the secondary SNTP server.
Time Setting 01/01/2000 Sets the current date and time manually.
Item Factory Default Description
Auto Power Off Auto Config Sets the behavior of Automatic Power Off.
Peak Power Control Off If it is set to [On], the machine acts to lower its maximum
energy consumption. Note that the machine may take
longer to start up or maximum printing speed may lower.
Item Factory Default Description
Unit of Measurement millimeter or inch *
1
Specifies the unit of custom paper size.
Item Factory Default Description
Default Paper Size A4 or Letter *
1
Sets the default paper size.
Item Factory
Default
Description
Paper Feed Roller
Counter Clear
MP Tray Clear Execute When the paper feed rollers in the MP tray are replaced,
clear the counter.
Tray1 Clear Execute When the paper feed rollers in the tray 1 are replaced,
clear the counter.
Tray2 Clear Execute When the paper feed rollers in the tray 2 are replaced,
clear the counter.
Tray3 Clear Execute When the paper feed rollers in the tray 3 are replaced,
clear the counter.
Tray4 Clear Execute When the paper feed rollers in the tray 4 are replaced,
clear the counter.
Tray5 Clear Execute When the paper feed rollers in the tray 5 are replaced,
clear the counter.
Flash Memory Setup Initialize Execute Initializes Flash Memory.
Format Partition PCL Formats a specified partition.
Job Log Setup Save Job Log Disable Sets Enable/Disable the saving job logs.
Clear Job Log Execute Clears the saved job logs.
Security Setup Access Control Disable Sets the Access Control.
User Counter
Report
Execute Prints the user counter report.
Language Setup Select
Language
English Selects display language for the LCD panel and Report
Prints.
(Simplified Chinese, Chinese (Traditional) and Korean:
Report Prints is in English.)
Language
Initialize
Execute Initializes the Language setup.
Item Factory Default Description
To Next Page
Loading...
Need help?
General
