Oki C910 - Page 246

Oki Data CONFIDENTIAL
44043511TH Rev.2
245 /
Display on the operator panel Meaning Measures
Data Present There is data remaining unprinted. Check the data.
Check Data An error has occurred during
reception of program data.
Check the data.
Check Data
Program Data Write Error
An error has occurred during writing
of program data.
Check the data.
Check Data
Program Data Receive Error
<nnn>"
An error has occurred during
reception of program data.
Check the data.
Cancelling Job Data is being deleted. Wait for a while.
Data Arrive Data is being received. Wait for a while.
Print Demo Page The demo page is being printed. Wait for a while.
Power Off and Wait for a while
126:Condensing Error
Condensation has occurred in the
printer. It is necessary to turn off the
power and leave it standing for a
while.
Turn off the power and leave it
standing for a while.
Toner Not Installed
CCCC
A CCCC toner cartridge is not
installed, or an unrecognized CCCC
toner cartridge is installed.
Install a genuine CCCC toner
cartridge.
Non Genuine Toner
CCCC
An unrecognized CCCC toner
cartridge is installed.
Install a genuine CCCC toner
cartridge.
Check Toner Cartridge
Improper Lock Lever Position
CCCC
The toner cartridge is not locked. Check the lever of the toner cartridge
for its position.
Install Toner
CCCC
The indicated toner has run out, or
genuine toner of indicated color is
not used.
Install a genuine toner cartridge of
the indicated color.
Reset Drum Basket An error has occurred during transfer
of waste toner.
Open the top cover and reinstall the
drum basket.
Reset Drum Basket
Waste Toner Transfer Error
An error has occurred during transfer
of waste toner.
Open the top cover and reinstall the
drum basket.
TRAY n Overfilled Too much paper is loaded into the
tray n.
Remove some paper from the tray n.
Change Paper in TRAY n
MEDIA_SIZE
MEDIA_TYPE
Please see HELP for details
Paper loaded into the indicated tray
is different from the specified one.
Load paper of the indicated size and
type in the indicated tray and press
the ONLINE button.
TRAY n Lift Up Error Paper can not be fed from the tray n. Load paper into the tray n correctly.
Printing(TRAY n) The printer is printing on paper from
the tray n.
–
TRAY n Empty The tray n has run out of paper. Load paper into the tray n.
TRAY n Overfilled Too much paper is loaded into the
tray n.
Remove some paper from the tray n.
TRAY n Near End The tray n is running out of paper. Prepare paper to load into the tray n.
Reset Tray
TRAY
Paper was not fed from the indicated
tray, and it is necessary to reinstall
the tray.
Reinstall the tray.
Install Tray
TRAY
The indicated tray is not installed
correctly. It must be reinstalled.
Reinstall the indicated tray.
Network Error A network error has occurred. Restart the printer.
Print Network Config The network configuration is being
printed.
Wait for a while.