OkiLAN 8200e Network User’s Guide
200
ftp> type
Using binary mode to transfer files.
ftp>
4. Transfer the print data to the network card using the put command.
Two methods of file transfer using the put command are available, as
shown in the examples below.
Example Method 1
Transferring print data test.prn
ftp> put test.prn
Example Method 2
Transferring print data specified by absolute path/users/test/
test.prn
ftp> put /users/test/test.prn /lp
5. Logout from the network card using the quit command:
ftp> quit
Viewing Status
Three states can be verified using the quote command stat:
• IP address
• login user name
• transfer mode.
In addition, printer status can be verified by specifying the directory after
the stat (lp, sjis, euc).
Example
Displaying network card status.
ftp> quote stat
211-FTP server status:
Connected to: 172.168.20.10.000.00
To Next Page
Loading...
Need help?
General
