Oki C9800hdn Color Guide

1
1-23 Managing color on the Fiery
C9800 Color Guide - 23
• None instructs the Fiery to allow the RGB sources you defined elsewhere, such as in
the application, to be used. When you set RGB Source to None, the appearance of
colors will not be independent of the file type. For example, RGB EPS files will look
different from RGB TIFF files.
With RGB Source set to None, PostScript RGB data that contains a source color
space definition is converted using the CRD specified by the Rendering Style option
(see page 1-18). Non-PostScript RGB data and PostScript RGB data that does not
contain a source color space definition are converted using a general undercolor
removal (UCR) conversion method.
CMYK Simulation Profile
The CMYK Simulation Profile print option allows you to print press proofs or
simulations. This setting specifies the offset press standard or other color printing
device that you want to simulate. This option affects CMYK data only.
With the Windows printer drivers, you can also view an unlimited number of custom
Full simulations created using ColorWise Pro Tools. On Mac OS computers, you can
view up to 10 Full custom simulations. The number of custom simulations is limited
by the disk space on the Fiery.
If you are printing with the PostScript driver from a Windows computer and have
Two-Way Communication enabled, the name of each downloaded or custom profile is
represented in the CMYK Simulation Profile setting menu. If you are printing with the
AdobePS driver from a Mac OS computer, downloaded or custom profiles appear as
Simulation-1 through Simulation-10. For more information on Two-Way
Communication, see the User Software Installation Guide Chapter 1.
The None setting sends your original CMYK data to the printer in its calibrated state,
without conversions to simulate another printer.
The CMYK Simulation Profile setting you specify depends on the press standard for
which the CMYK data was separated.
• For images that were separated using a custom separation (such as a separation
produced with an ICC profile), choose the corresponding profile on the Fiery with
the CMYK Simulation Profile setting.
• For images that were separated for SWOP, choose SWOP as the CMYK Simulation
Profile setting.

Oki C9800hdn Specifications

Performance

print speed color	36 ppm
print speed mono	40 ppm
time to first page color	10.5 sec
time to first page mono	9 sec
warm-up time	110 sec
resolution	1200 x 1200 dpi
processor	1 GHz
duty cycle	150, 000 pages/month

Memory

standard ram	1, 024 MB
flash memory	4 MB
hard disk drive	20 GB

Paper Handling

standard input	760 sheets
optional input	2nd/3rd universal tray (530 sheets each)
maximum capacity	2, 880 sheets
paper sizes supported	up to 12.9" by 47.24"
paper weight trays 1-5	17 lb.–57.5 lb. bond
duplex printing	standard on C9800hdn

Power and Acoustic Noise

power consumption typical	750W
power consumption peak	1500W
power consumption idle	200W
acoustic noise operating	54dB(A)

Weight and Dimensions

size	25.8" x 24.4" x 18.2"
weight	152 lb.