3
3-62 ColorWise Pro Tools
C9800 Color Guide - 62
N
OTE: You can define custom profiles only. Default profiles are predefined and cannot
be changed.
2. Select DIC-new in the Simulation list, and click Profile Settings or double-click
DIC-new.
3. Select the “Appear in Driver as” option, choose one of the predefined custom
simulation names (Simulation-1 through Simulation-10) from the menu, and then
click Apply.
N
OTE: Choose a name that is not already linked with another simulation. You cannot
define two profiles with the same name.
NOTE: Although you cannot delete a preset profile, you can use the name of a preset
profile for your edited profile when you select the “Appear in Driver as” option. This
replaces the preset profile with your own profile.
In Profile Settings, you can also change profile descriptions for all non-locked profiles.
4. Click OK.
Simulation-1 now appears under the “Appear in Driver as” column for DIC-new.
Choosing Simulation-1 from the CMYK Simulation option of the printer driver
applies the DIC-new simulation to the print job.
If you do not define a custom simulation profile, your job will print with CMYK
Simulation Profile set to None. If you do not define a custom RGB Source or Output
profile, the default profile is used.
To Next Page
Loading...
