USING TEMPLATES
- 206 -
8
Select the template that you want to use.
• If you select a password-free template for which the
automatic start function is enabled ( is shown on the
button), the equipment automatically starts the
scanning operation. (End of procedure)
• If you select a password-free template for which the
automatic start function is disabled, the SCAN menu
appears. In this case, proceed to step 13.
• If you select a template for which a password is set,
you need to enter the password. In this case, proceed
to step 9.
• icon appears on a meta scan template. If you select
a meta scan template, proceed to step 12.
9
Press [PASSWORD].
10
On the password input screen, enter the
template password using the keyboard and
digital keys, and then press [OK].
11
Press [OK].
If you select a template for which the automatic start
function is enabled ( is shown on the button), the
equipment automatically starts the scanning operation.
(Proceed to step 14.)
12
To use a meta scan template, enter
information as required, and then press
[SCAN].
1) Press the button for each item and enter
information as required.
2) Finally, press [SCAN].
Proceed to step 14.
To Next Page
Loading...
Need help?
General
