Oki lan 8100e - Page 122

OkiLAN 8100e Network User’s Guide
UNIX - 122
# /etc/inetd –c
4. Register the remote printer
Example: setting up a queue called PRINTER_lp to print to
host PRINTER
a. Register the remote printer.
# /usr/sbin/lpadmin -pPRINTER_lp -v /dev/null
-mrmodel \-ormPRINTER -orplp -ocmrcmodel
-osmrsmodel -ob3
b. Activate the print queue.
# /usr/sbin/accept PRINTER_lp
c. Enable the print queue.
# /bin/enable PRINTER_lp
d. Enable the printer spooler.
# /usr/sbin/lpsched
To customise output, for example, to add additional commands at
the start of each print job, you can edit a copy of the /usr/spool/
lp/model/rmodel model file then add it using the lpadmin
command.
Example: for printer PRINTER_lp, with model file called
PRINTER_model
# /usr/sbin/lpshut
# /usr/sbin/lpadmin –pPRINTER_lp –
mPRINTER_model
# /usr/sbin/lpsched