OkiLAN 8100e Network User’s Guide
Configuration - 23
Standard Setup Using AdminManager
AdminManager is a powerful Microsoft Windows-based utility to
configure all print server functions by using a graphical user
interface.
Configuration requires a PC with Windows 95/98/Me, Windows
2000 Advanced Server/Professional or Windows NT Server 4.0/
Work-station 4.0, Windows XP running TCP/IP or IPX/SPX
(NetWare).
This utility can only be used on a PC that can be connected to the
network with TCP/IP or IPX/ SPX and must be used on a PC that is
located in the same segment as the printer.
To create a NetWare queue, NetWare Client 32 or IntranetWare
Client should be installed on to your system.
The following explanation uses Windows 98 as an example.
To Next Page
Loading...
