OkiLAN 8100e Network User’s Guide
Configuration - 61
Using Setup Assistant
Setup Assistant is a large volume tool that can do the following:
> setup ID addresses on multiple print servers all at once.
> update firmware on multiple print servers all at once.
> update the template file and set details in multiple print
servers all at once.
Install Setup Assistant from the CD-ROM provided with your
printer.
1. Insert the CD-ROM provided with your printer into the
CD-ROM drive.
If the Menu Installer does not start automatically, click Start
→ Run → Browse. Browse to your CD-ROM. Click Install →
Οpen → OK.
2. Select [Network Software].
3. Select [Installation/Config].
4. Select [Setup Assistant].
5. Follow the on-screen instructions.
To Next Page
Loading...
