OkiLAN 8100e Network User’s Guide
UNIX - 124
b. Activate the remote printer daemon.
# startsrc –s lpd
# mkitab ‘lpd:2:once:startsrc –s lpd’
3. Add the print queue using the smit command.
a. Activate the smit command and convert to the item
[Add print queue].
# smit mkrque
b. Select [remote] (the printer connected to the remote
host) from [Type of connection].
c. Select [Standard procedure] from Type of remote print.
d. Carry out the following settings in [Add a standard
remote print queue]. If the configuration differs from
below, configure according to environment.
Example: fr direct output port lp with print queue
okiprinte_lp and print server okiprinte
Queue to be added “printer_lp”
Host name of the
remote server “printer”
Queue name of the
remote server “lp”
Type of print spooler
of the remote server “BSD”
Description of printer name
To Next Page
Loading...
