OkiLAN 8100e Network User’s Guide
Configuration - 44
1—5 By selecting each button, the following dialogue box is
displayed:
bmp35.bmp
In the dialogue box, the following items can be
configured:
Available
condition and
Selected
condition
Select each E-mail alert condition.
Select a condition from Available
Condition list and click >>. The
selected condition is copied to
Selected condition list. Available
conditions are:
Off line, Consumable Message, Toner
Low/Out, Paper Low/Out, Paper Jam,
Cover Open, Stacker Error, Mass
Storage Error, Recoverable Error,
Service Call Request and Finisher
Error.
To Address 1—5 Set E-mail addresses to that E-mail
should be send. Up to five E-Mail
addresses can be set.
Check Interval Set interval that the OkiLAN checks
specified event(s). An E-mail is sent
when specified event(s) occurs when
DISABLE is selected.
Location Comments
To Next Page
Loading...
