Oki MC332dn Startup Guide

- 57 -
Scanning to E-mail
4
Scanning
4 On the [General] tab, enter the
contents of [Name] and [E-mail
address] in B-9 and B-10 of the Setup
Information Form.
B-9
B-10
5 Click the [Servers] tab, and then
note each setting in the corresponding
columns of the Setup Information Form.
B-3
B-2
B-7
B-8
- If there is a check in the [My server
requires authentication] checkbox,
enter “SMTP” into B-4 and follow
procedure 6.
- If there is no check in the [My server
requires authentication] checkbox,
enter [POP or not yet authenticated]
in B-4. At this point the conrmation of
E-mail settings is complete.
Note
● If using an internet service provider, enter [POP].
6 Click [Settings].
7 Check the login information on the
[Outgoing Mail Server] dialog box.
- If [Use same settings as my incoming
mail server] is selected, enter the same
values as B-7 and B-8 on B-5 and B-6.
- If [Log on using] is selected, note
the content of [Account name] and
[Password] in B-5 and B-6, respectively.
 Step 2-2 Setting the E-mail
Address for Your Machine
When sending data scanned from the
machine by an E-mail, the E-mail address for
the machine is necessary. According to the
following procedure, set the E-mail address for
the machine and enter it in B-1 of the Setup
Information Form.
● If the E-mail address for your machine is
specied by the network administrator, enter
the E-mail address in B-1.
● If you are using an internet service provider,
obtain an E-mail address for your machine
from the provider and then enter the E-mail
address in B-1.
● If the E-mail address for your machine is
neither specied nor obtained, determine the
E-mail address according to the value you
entered in B-4 (authentication method):
- If B-4 is “SMTP”, determine an E-mail
address and enter it in B-1.
- If B-4 is “POP”, enter the same E-mail
address as B-10 in B-1.
Note
● If you want your machine to receive E-mail, you must
obtain an E-mail address for your machine from a network
administrator or your internet service provider.
 Step 2-3 Conguring Your
Machine’s E-mail Settings
Set up your machine’s E-mail settings using the
information in the Setup Information Form.

Oki MC332dn Specifications

General

Duplex printing	Yes
Print technology	Laser
Maximum resolution	- DPI
Print speed (black, normal quality, A4/US Letter)	22 ppm
Print speed (color, normal quality, A4/US Letter)	20 ppm
All-in-one functions	Copy, Print, Scan
Color all-in-one functions	Scan
Digital sender	No
Maximum duty cycle	30000 pages per month
Page description languages	PCL 5c, PCL 6, PostScript 3, SIDM
Copier resize	25 - 400 %
Maximum copy resolution	600 x 600 DPI
Maximum number of copies	99 copies
Time to first copy (black, normal)	12 s
Time to first copy (color, normal)	14 s
Copy speed (black, normal quality, A4)	20 cpm
Copy speed (color, normal quality, A4)	22 cpm
Scan to	CIFS, E-mail, USB
Input color depth	48 bit
Output color depth	24 bit
Scan speed (black)	30 ppm
Optical scanning resolution	1200 x 1200 DPI
Total input capacity	250 sheets
Maximum input capacity	350 sheets
Multi-Purpose tray input capacity	100 sheets
Auto document feeder (ADF) input capacity	50 sheets
Envelopes sizes	9, DL
Maximum print size	216 x 297 mm
Duplex media weight	60 - 90 g/m²
Paper tray media types	Envelopes
Paper tray media weight	64 - 176 g/m²
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5
ISO C-series sizes (C0...C9)	C5
Maximum ISO A-series paper size	A4
Multi-Purpose Tray media weight	64 - 220 g/m²
Auto Document Feeder (ADF) media weight	60 - 105 g/m²
Display	LCD
Product color	White
Display resolution	320 x 128 pixels
Market positioning	Business
Standard interfaces	Ethernet, USB 2.0
USB 2.0 ports quantity	2
Internal memory	256 MB
Sound power level (standby)	52 dB
AC input voltage	220 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (average operating)	500 W
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	20 - 80 %

Weight and Dimensions

Depth	509 mm
Width	427 mm
Height	444 mm