Installing upgrades > 138
A
DDITIONAL
PAPER
TRAY
1. Switch the MFP off and disconnect the power cable. Refer to “Turning off your
machine” on page 21 for details.
2. Place additional paper tray on desired location.
3. Observing safety rules for lifting and, using locating guides, place machine on top of
the additional paper tray.
4. Fit retaining clips as shown.
5. Reconnect the power cable and switch the MFP on.
All that remains is to adjust the printer driver to make full use of the new features
(“Setting the driver device options” on page 139).
To Next Page
Loading...
