Oki Microline 320 User Manual

E – 4
Important Wiring Instructions
The wires in the mains lead are coloured in
accordance with the following code:
Green and Yellow Earth
Blue Neutral
Brown Live
If the colours of the wires in the mains lead of this
printer do not correspond with the markings of the
terminals of your plug, proceed as follows:
Green and Yellow must be connected to the
terminal marked with the letter E (or the safety
earth symbol) or the terminal coloured Green or
Green and Yellow. Brown must be connected to the
terminal marked with the letter L or coloured Red.
Blue must be connected to the terminal marked
with the letter N or coloured Blue or Black.
Warning: This printer must be earthed.
If you are in any doubt regarding the wiring, please
contact a qualified electrician.

Oki Microline 320 Specifications

General

Print Method	Impact Dot Matrix
Emulation	Epson FX, IBM ProPrinter
Print Direction	Bidirectional
Resolution	240 x 216 dpi
Connectivity	Parallel
Paper Handling	Continuous Forms, Cut Sheet
Paper Width	Up to 10 inches
Noise Level	55 dBA
Number of Pins	9-Pin