Oki Microline 320 User Manual

E – 5
Installing Your Printer
Prior to unpacking the printer, find a flat, sturdy
surface to place it on, for example, a desk, printer
stand, etc. Gently remove the printer from its
carton. Make sure you have everything shown
below:
➢ MICROLINE 320/390 FLATBED printer
➢ Sheet stacker
➢ Power cord
➢ Ribbon cartridge
➢ Printer Handbook
Note: Save the box and all packing material. Repack
the printer when planning to transport it long
distances, in order to protect it from rough handling
and damage.
Note: You can purchase an interface cable and paper
for the MICROLINE 320/390 FLATBED from your
dealer.
ln the unlikely event that anything is missing or
damaged, contact your dealer immediately.
Ribbon cartridge
Power cable
Printer handbook
Sheet stacker
!
Printer
!

Oki Microline 320 Specifications

General

Print Method	Impact Dot Matrix
Emulation	Epson FX, IBM ProPrinter
Print Direction	Bidirectional
Resolution	240 x 216 dpi
Connectivity	Parallel
Paper Handling	Continuous Forms, Cut Sheet
Paper Width	Up to 10 inches
Noise Level	55 dBA
Number of Pins	9-Pin