Oki ML3320 Help Guide

12 ML3320/21
LF
GROUP
Micro Feed
Down
QUIET
TOF
Running the Self Tests
Font Sample Test
To run the test: Turn the printer off, then press and hold
LF while turning the printer on.
To stop the test: If you wish to stop the test before it is
complete, press SEL.
ASCII Test
To run the test: Turn the printer off, then press and hold
QUIET while turning the printer on.
To stop the test: Press SEL.
Selecting an Emulation
Your printer has three emulations:
• Epson
®
FX
• IBM
®
Proprinter III
• MICROLINE
®
Standard
The printer comes set for the IBM Proprinter III emulation.
To change to one of the other emulations:
1. Make sure paper is loaded.
2. Deselect the printer (SEL light off, press SEL key).
3. Press SHIFT + SEL: the printer will enter the Menu
Mode.
QUIETPARKTEAR FF/LOAD
LF
SEL
SEL
POWER ALARM
MENU
GROUPEXIT
ITEM SET
PRINT
MENU
SHIFT TOF
Micro Feed
Up
Micro Feed
Down
3320rmf3.pm6 13/03/96, 16:0812

Oki ML3320 Specifications

General

Print Technology	Dot Matrix
Interface	Parallel, USB
Emulations	Epson FX, IBM ProPrinter
Resolution	240 x 216 dpi
Print Speed	435 cps
Noise Level	57 dB
Number of Pins	9-pin