Oki ML420 - Page 29

42113901TH01 Rev.3 29 /
Oki Data CONFIDENTIAL
Stop
Temp
105°C
95°C
(b) SP motor overheat alarm
The voltage of the output SPTEMP signal of the thermistors, one of which is contained
in the SP Motor, is monitored by the A/D port of the MPU to control the voltage.
Mode and print control
• When the temperature exceeds 105°C, printing will stop.
Mode
1
2
3
PrintSpeed
100%
50% ~ 95%
Stop
Temp
~ 94°C
95°C ~ 104°C
105°C ~