Using your printer > 22
3. Pivot the sheet guide forward and gently rest it against the roller assembly (2).
If you push the sheet guide too hard against the roller assembly, it may dislodge it.
If it does, be sure to reseat the roller assembly before continuing.
4. From the back of the printer, locate the tractors (1).
5. Open the lock levers (1) and move the right tractor (as viewed from the back of the
printer) to the reference mark (2) matching the width of the paper you are loading.
Then close the lock lever on the right tractor:
NOTE
The movement of the right tractor is limited to ensure that the paper covers
the paper sensor.
1
1
1
To Next Page
Loading...
Need help?
General
