Oki ML5520 - Getting Started with Your Printer; Printer Location, Unpacking, and Setup

Getting started > 9
G ETTING STARTED
L OCATION
> Place your printer on a firm, solid surface.
> Allow enough space around the printer to easily access the platen knob and the
various paper feed paths.
> Make sure a suitable grounded power outlet is available nearby.
U NPACKING
> If any items are missing, contact your dealer immediately.
> Keep your packing materials and carton in case you ever need to ship or transport
the printer.
> Interface cable and paper are sold separately.
1. Remove any packing tape, then grasp the tabs (1) at either end of the access cover
and pivot it towards the front of the printer as far as it will go.
2. Remove the printhead shipping restraint.
1
2
3
1. Printer
2. Ribbon Cartridge
3. Power Cord
1