Oki ML5520 - Maintenance Procedures; Replacing the Ribbon Cartridge and Handling

Maintenance > 54
M AINTENANCE
R EPLACING THE RIBBON CARTRIDGE
Make sure you have the correct replacement ribbon for your printer. The wrong ribbon will
not print when installed in your printer. Look for the printer model number on the ribbon
package.
R IBBON CARTRIDGE HANDLING
> Leave unused ribbon cartridges in their packages until needed.
> Careful; the ribbon ink may cause permanent stains.
> Ribbon ink on skin or clothing can usually be removed with soap and water.
Make sure the printer is turned OFF.
1. Open the access cover and center the printhead (1).
2. Swing the used ribbon cartridge up off the printhead, lift it out, and discard it.
WARNING!
The printhead may be HOT.
1