Using your printer > 27
5. Open the tractor covers and place continuous forms paper on the first two pins of
either tractor, then close the left tractor cover.
6. Adjust the position of the right tractor to center the holes in the paper on the pins.
Then, close the right tractor cover and push back the lock lever. Do not stretch the
paper.
If the paper is too loose or too tight it can cause jams.
NOTE
You must keep the number of paper holes engaged on either pin the same. If
you don’t the paper will skew and jam.
15 16
To Next Page
Loading...
Need help?
General
