Oki ML5520 - Page 46

Menu mode > 46
Rear Feed Line Spacing Select line feed pitch.
Change to 8 lines per
inch (lpi) to get more
lines per page.
6 LPI
8 LPI
Form Tear-Off When printer is idle (0.5,
1.0 or 2.0 sec), paper is
advanced from the
current print position to
the tear position. When
data is received, paper is
moved to its original
printing position.
Off
0.5 sec
1.0 sec
2.0 sec
Skip Over
Perforation
Select whether to skip
over perforation or not.
(When a skip over
perforation command is
received, the received
command is given
priority.)
No
Yes
Page Width
(Displayed only for
ML5521ECO and
ML5591ECO)
Change to 8” to print on
narrow paper.
345.44 mm (13.6”)
203.2 mm (8”)
Page Length Select the length of a
continuous form. This
enables the printer to
keep track of the initial
printing position (TOF)
on each page.
279.4 mm (11”)
296.3 mm (11 2/3”)
304.8 mm (12”)
355.6 mm (14”)
431.8 mm (17”)
76.2 mm (3”)
82.6 mm (3.25”)
88.9 mm (3.5”)
101.6 mm (4”)
127.0 mm (5”)
139.7 mm (5.5”)
152.4 mm (6”)
177.8 mm (7”)
203.2 mm (8”)
215.9 mm (8.5”)
GROUP ITEM FUNCTION SETS
ML5520ECO/
ML5521ECO
ML5590ECO/
ML5591ECO