Oki ML5520 - Page 50

Menu mode > 50
Set-up
cont.
Auto LF Select whether to
perform auto LF
operation or not upon
receiving a CR code. If
your print out is
consistently double
spaced, select No, if it
overprints, select Yes.
No
Yes
Auto CR
(Displayed only for
IBM emulation)
Select Yes to add a
carriage return when a
Line Feed is received at
the end of a line.
No
Yes
CSF Bin Select Appears only when the
optional Dual-Bin cut
Sheet Feeder is
installed. Use this to
switch to Bin 2 as the
default.
Bin 1
Bin 2
Print DEL Code
(Displayed only for
ML Emulation)
Change the setting to
Yes to print the DEL code
(decimal 27) as a solid
box.
No
Yes
-
SI Select Pitch (10
CPI) (Displayed
only for IBM
emulation)
Select how to handle an
SI command received in
10 CPI mode.
17.1 CPI
15 CPI
SI Select Pitch (12
CPI) (Displayed
only for IBM
emulation)
Select how to handle an
SI command received in
12 CPI mode.
12 CPI
20 CPI
Time Out Print Select valid or invalid.If
your software spends a
long time processing
between portions of data
it feeds to the printer,
change the setting to
Invalid to keep your
printer from dumping
the received data while
it is waiting for more.
Invalid
Valid
Auto Select Determines whether or
not the printer will
automatically be
selected after you load
in paper. Select No if you
want to set the Top of
Form position. If you
always want to use the
same Top of Form
position, change the
setting to YES.
Yes
No
Graphics Speed Change to High for
faster printing when the
optimum print quality is
not an issue.
High
Low
GROUP ITEM FUNCTION SETS
ML5520ECO/
ML5521ECO
ML5590ECO/
ML5591ECO