Troubleshooting > 60
3. Open the access cover (1) and remove the pull-up roller assembly (2). Then grasp
the tabs (3) on the sheet guide (4) and lift it off the printer.
4. Remove any torn pieces of paper.
5. Fold some continuous form paper over three times to make a page four sheets thick.
Then, load it on the tractors and close and lock the covers.
6. Use the platen knob to draw the quadruple-thick page around the platen. This brings
out jammed pieces of paper.
7. Remove the paper pieces. Then, use the platen knob to back the paper out.
8. Load standard paper, close and lock the tractor covers.
To Next Page
Loading...
