40496501TH Rev.1 154
R Alarm lamp flashes, Message on the LCD “ERROR, PAPER JAM”
Is the paper on the feeding route torn?
No Yes
• Remove any torn paper and load a new paper.
▼
• Is the connection of cables properly made to the CN1 and the CN9 on the PHA board?
Yes No
• Properly reconnect them.
▼
• Is the connection of cable properly made to the CN6 on the PMA board?
Yes No
• Properly reconnect it.
▼
• Can the printer recover after the print start sensor and/or coregap cable is replaced?
No Yes
• End
▼
• Can the printer recover after the connection cable between the CN1 on the PMA board and the
CN6 on the PMA board is replaced?
No Yes
• End
▼
• Replace the PHA board.
To Next Page
Loading...
