Need help?Do you have a question about the OKM Rover UC and is the answer not in the manual?
General| Weight | Approx. 3.5 kg |
|---|---|
| Power Supply | Rechargeable Battery |
| Operating Temperature | -10°C to +50°C |
| Operating Principle | Electromagnetic induction |
| Interface | Bluetooth |
| Voltage | 12 V |
| Data Transmission | Bluetooth |
| Data Storage | Internal |
| Display | LCD |
| Type | Ground Penetrating Radar (GPR) |
A welcome message and initial guidance for using the Rover UC device safely and correctly.
Covers health hazards, surrounding area, voltage, data safety, and general handling advice.
Guidelines for maintaining, using, and protecting your Rover UC from damage and wear.
Warnings about potential explosive objects during excavation and proper care and use procedures.
Detailed technical data for the telescopic probe, including dimensions, weight, and performance metrics.
Technical details for the wireless data transfer, including frequency range and transfer rate.
Description of the telescopic probe's components like Minidisplay, Trigger, and USB-C socket.
Details on the Android Smartwatch interface and the Rover UC App screen layout.
Instructions on how to pair and use Bluetooth headphones with the Rover UC detector.
Step-by-step instructions for assembling the detector and preparing it for the first scan.
Using the Activity Screen, pedometer reset, and compass calibration procedures.
Guide to preparing and performing a 3D Ground Scan, including parameter settings and scan modes.
How to use the Magnetometer mode for detecting ferromagnetic metals and performing ground balance.
Using the Pinpointer mode for target analysis and understanding scan result signatures.
Browsing, viewing, and managing saved scan files on the device.
Adjusting general settings like language, sound, vibration, GPS, app theme, and units.
Procedures for activating the app and updating the device firmware.
Steps to pair the computer's Bluetooth with the Rover UC for the first-time data transfer.
Instructions on importing scan data from the Rover UC to the Visualizer 3D Studio software.
To Next Page