Displaying additional information
When the gas monitor is in normal operation, the user can access additional
information. Press the button repeatedly to scroll through the following screens:
■ Date (backlit is ON)
■ Area identification or user name (only if Roundsman option is activated; see
paragraph Roundsman function, below)
■ Remaining battery life (bargraph)
■ min/max values for each sensor
■ STEL value for each toxic sensor
■ TWA value for each toxic sensor
■ Maintenance menu which is password protected. To enter the maintenance menu
enter the 4-digit code using the and buttons.
Press the button to return to normal operation.
Roundsman function
If the Roundsman function has been activated, a list of names can be programmed
using COM 2100 software. This list can be viewed at any time by using the front keys
on the device.
To select a location or a user, follow these steps:
■ Press the button repeatedly until Current location/name appears.
■ Press Enter.
■ Scroll through the list using the and buttons.
■ Press Enter to confirm your selection.
■ Press to return to normal mode.
Reset the Min/Max
Press simultaneously the and buttons to reset the min/max values. The BM
25/25W sounds a beep to confirm the action.
To Next Page
Loading...
Need help?
General
