AM/FM
Stereo Radio with Automatic Tone
PWRNOL:
With the ignition on, push the power/volume
Control and Cassette Tape Player
knob to
turn
the system on or
off.
Turn it clockwise to
increase the volume. Turn it counterclockwise to decrease
the volume.
AM/FM:
Press the AM/FM button to change between
the AM, FMl, and FM2 bands. The display will show
which band you are receiving.
If
you press this button
while a tape is playing, the tape will stop and the radio
will return to the AM or FM band that you were
previously receiving.
TUNE:
Press lightly
on
this knob to release it from its
recessed position. Turn
it
to tune in radio stations.
You
may push the knob back in to return
it
to
its recessed
position when not in use.
The digital display indicates the time
or
radio station
frequency, the AM or
FM
radio band, whether the
station is in stereo, and other audio system functions.
3-13
To Next Page
Loading...
