Problems
on
the
Road
202
Engine Overheating
(CONTJ
3.
After the engine cools, open the
coolant air bleed valve or valves.
3.1L
V6 (VIN
Code
T
or
M):
There
are two bleed valves. They are located
on the thermostat housing and the
thermostat bypass tube.
3.4L
V6 (VIN
Code
X):
There are
two bleed valves. They are located on
the thermostat housing and the
heater inlet pipe.
4.
Fill the radiator with the proper
mix,
up to the base of the filler neck.
If
you
see
a stream
of
coolant coming
from
an
air bleed valve, close the valve.
Otherwise, close the valve(s) after the
radiator is filled.
5.
Rinse
or
wipe any spilled coolant
from the engine and compartment.
To Next Page
Loading...
