6.
Then fill the coolant recovery tank to
the COLD mark.
7.
Put the cap back on the coolant
recovery tank, but leave the radiator
pressure cap
off.
8.
Start the engine and let it
run
until
you can feel the upper radiator hose
getting hot. Watch out for the engine
fans.
9.
By
this time, the coolant level inside
the radiator filler neck may be lower.
If
the level is lower, add more of the
proper mix through the filler neck
until the level reaches the base of the
filler neck.
203
To Next Page
Loading...
