Olimpia splendid maeStro Pro - Control Panel Notifications

MAESTRO PRO INVERTER
B
MODE
Display
LED5LED1
ENGLISH
EN - 19
Keys
Before performing the following operations, press one of the
keys to enable the console.
+ Increase in the desired temperature (maximum value
settable is 30°C/86F).
- Decrease in the desired temperature.
(minimum value settable in heating mode is 16°C/61F,
in cooling mode is 18°C/64F).
Activation/deactivation (Stand-by) of the air conditioner
and ventilation speed selection.
- Brief tap to select minimum, medium, maximum or automatic speed.
- Prolonged press for activation/deactivation (Stand-by).
MODE Operation mode selection and parameters setting
- Brief tap (for more than 2 seconds) to select ventilation, cooling or heating operation modes
- Prolonged press to enable parameters setting if in Stand-by mode
+ and - To be pressed simultaneously for at least 5 seconds to enable/disable the keypad lock function
and MODE To be pressed simultaneously and for an extended period of time (at least 5 seconds) to
settozerothelterdirtyreport
Others
IR Infrared receiver
B Buzzer
3.3 - CONTROL PANEL NOTIFICATIONS
 Theconsoleincludesthenoticationslistedbelow.
OPERATING CONDITIONS DISPLAY LED5 LED1
Stand-by OFF OFF OFF
Cooling mode 18÷30°C/64÷86F
ON
BLUE
X
Heating mode 16÷30°C/61÷86F
ON
RED
X
Dehumidicationmode
ON
BLUE
X
Ventilation mode
OFF X
Automatic mode
X X
Maximum ventilation speed
X X
Medium ventilation speed
X X
>>>