Olimpia splendid maeStro Pro - Checking Airflow Direction; Checking Fan Speed; Silent Key; Timer Setting

MAESTRO PRO INVERTER
ENGLISH
EN - 25
3.6.9 - Checkingairowdirection
• PresskeyB4 on the remote control to activate/deactivate the continuous oscillation of the moving air
outletdeector(g.A-ref.1).
• Whencontinuousoscillationisactive,anadditionalpressofthekeyB5allowstolockthedeectorsoas
toobtainthedesiredverticaldirectionfortheairow.
The moving deector position must never be forced manually.
3.6.10 - Checking fan speed
• ThefanspeedcheckoccursthroughkeyB2 (on the remote control).
• Pressingseveraltimesthiskeywillcausespeedtochangeaccordingtothefollowingsequence:
Low > Medium > High > Automatic.
• Thehigherthespeedsetting,thegreatertheoutputoftheairconditionerbutalsothelouderitsoperation.
• BysettingtheAutomaticmode,theonboardmicroprocessoradjuststheautomaticspeed.Thehigherthe
difference between the room temperature detected and the temperature set, the higher the speed.
• Astheroomtemperaturenearsthesetting,fanspeedisreducedautomatically.
• Indehumidicationmode,itisnotpossibletocontrolthespeedastheappliancecanonlyoperateexclu-
sively at low speed.
3.6.11 - SILENT key
• Toactivatethismode,presskeyB3 on the remote control (symbol D14 appears on the display).
• TheactivationofthefunctionSILENT allows to obtain multiple results:
- gradual increase in the set temperature during cooling mode
- gradual decrease in the set temperature for heating (HP versions only)
- reduction of the sound level of the appliance
- reduction of ventilation speed
• ToactivatethefunctionSILENT, it is necessary to select the operating mode and the desired temperature
rst,thenpresskeyB3 to activate it.
• Noisereductioninvolvesthemachinenoiseandcooling/thermalpoweroptimization.If,incertainmoments,
cooling/thermalpowerisinsufcient,disablethefunctionSILENT.
3.6.12 - Timer setting
• TheappliancelogicallowstheUsertomakeuseoftwodifferenttimerprograms(seeparagraph3.6.14),
thanks to which the appliance can be deactivated and activated (or vice versa) whenever desired (for
example,itcanbeactivatedshortlybeforereturninghomesoastondanalreadypleasanttemperature
in the room).
• Firstly,ifitisdesiredtomakeuseofthesefunctions,setthecorrecttime(seeparagraph3.6.13)andthen
set the timer as you prefer.