Oliver 709 - Slicer Starts But Will Not Continue To Run; Bread Slices Vary In Thickness

MODEL 709 MINI SUPREME BREAD SLICER
Revised 3-25-98 0709S20031-2
TROUBLE SHOOTING (CONT’D.)
• The Slicer Will Start, But, Will Not Continue To Run:
Possible Causes:
1. The relay is not operating: have it checked by a qualified electrician.
2. One of the internal limit switches have become loose and is out of position. See the
adjustment section of this manual.
3. A internal limit switch has failed: have them checked and replaced if necessary by a
qualified electrician.
• Bread Slices Vary In Thickness:
Possible Causes:
1. The blade frames should be adjusted, see the adjustment section of this manual.