MODEL 709 MINI SUPREME BREAD SLICER
0709S20026
INSTALLATION INSTRUCTIONS
WARNING
THE SLICER IS HEAVY. USE PROPER LIFTING TECHNIQUES, KEEP
BACK STRAIGHT, KNEES BENT, AND LIFT WITH YOUR LEGS. USE
GLOVES TO PROTECT YOUR HANDS.
Lift the slicer from its resting surface with one person standing on each end of the slicer,
(front and back), set the slicer onto the counter or table as close as possible to its
desired location.
CAUTION
BEFORE PLACING THE SLICER ON A TABLE OR COUNTER, MAKE SURE
THE TABLE OR COUNTER CAN SUPPORT THE SLICER’S WEIGHT WHICH
IS APPROXIMATELY 115 POUNDS.
Should the machine not be in its desired location, carefully slide the machine to its final
location.
The machine may now be connected to a properly grounded power supply of the same
voltage and of sufficient capacity for the load which the slicer will put on it. See the
electrical requirements on the “Oliver Nameplate” on the rear of the machine. DO NOT
USE EXTENSION CORDS.
WARNING
BEFORE ATTEMPTING TO SLICE BREAD READ THE “OPERATION”
SECTION OF THIS MANUAL.
To Next Page
Loading...
