Oliver 709 - Motor Selection Guide

MODEL 709 MINI SUPREME BREAD SLICER
0709S20034-3
NOTE
THE FOLLOWING COMPONENTS MUST BE SELECTED BASED ON THE
MODEL OF GEARMOTOR AND THE ELECTRICS USED ON YOUR SLICER.
“Dayton” Motor wired as 1 Phase, 60 Hertz, 115 Volts AC
ITEM NO. PART DESCRIPTION PART NUMBER
701 Crank-Motor 0709-0010
702 Rod-Long Connecting 0709-0034-001
706 Motor-Gear 6310-0250
--- Cord-Motor 0709-0044-101
--- Cord-Power 0709-0056-007
“Leeson” Motor wired as 1 Phase, 60 Hertz, 115 Volts AC
ITEM NO. PART DESCRIPTION PART NUMBER
701 Crank-Motor 0709-0010-002
702 Rod-Long Connecting 0709-0034-003
706 Motor-Gear 6310-1910
--- Cord-Power 0709-0056-007
“Leeson” Motor wired as 1 Phase, 60 Hertz, 230 Volts AC
ITEM NO. PART DESCRIPTION PART NUMBER
701 Crank-Motor 0709-0010-002
702 Rod-Long Connecting 0709-0034-003
706 Motor-Gear 0709-0054-004
--- Cord-Power 0709-0056-005
--- Cap-Plug 3-Wire 250 VAC 5765-2030
“Leeson” Motor wired as 1 Phase, 50 Hertz, 220 Volts AC
ITEM NO. PART DESCRIPTION PART NUMBER
701 Crank-Motor 0709-0010-002
702 Rod-Long Connecting 0709-0034-003
706 Motor-Gear 0709-0054-004
--- Cord-Power 0709-0056-006
REV. 5-24-00