- To check the settings for a registered destination, select its registered name, then tap [Check Settings].
- To change the settings for a registered destination, select its registered name, then tap [Edit].
- To delete a registered destination, select its registered name, then tap [Delete].
Settings Description
[No.] Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name] Enter the destination name (using up to 72 characters).
[Favorites] Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorites], enabling you to easily specify a destination.
[Index] Select a corresponding character so that the destination can be index
searched by name.
[E-mail] Enter the E-mail address as a destination (using ASCII characters of up to 320
bytes).
Settings Description
[No.] Destination registration number. The smallest available number that is not
used is automatically assigned.
[Name] Enter the destination name (using up to 72 characters).
[Favorites] Select this option to register a frequently used destination. The registered des-
tination is displayed in [Favorites], enabling you to easily specify a destination.
[Index] Select a corresponding character so that the destination can be index
searched by name.
[Connection] Register information of the destination computer.
[Host Name] Enter the host name or IP address of a destination computer.
• Example of computer name (host name) entry: "HOME-PC"
• Example of IP address (IPv4) entry: "192.168.1.1"
• Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16"
[File Path] Enter the shared folder name of the computer specified in [Host Name] (using
up to 255 bytes).
• Entry example: "scan"
When specifying a folder in the shared folder, insert a symbol, "\", between
folder names.
• Entry example: "scan\document"
[User ID] Enter the name of a user who has privileges to access the folder specified in
[File Path] (using up to 255 bytes).
• For workgroup user, only type in the user name. Entry example: "User01"
• For domain user, type in user-name@domain-name. Entry example: "Us-
er01@abc.local"
[Password] Enter the password (using up to 127 bytes).
[Browse] Detect the target computer on the network, then select the shared folder.
Information of the selected folder is registered.
To Next Page
Loading...
Need help?
General
