4-69
Using the Operation Panel
Security Level (Security Level setting)
Security Level is primarily a menu used by service personnel for
maintenance work. There is no need for customers to use this menu.
Thin Print (Thin Print setting)
Select whether or not to use ThinPrint.
1 After entering the administrator ID and password, press U or V
repeatedly until >ThinPrint > appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using U or V.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
Thin Print over SSL (Thin Print over SSL setting)
Select whether or not to use ThinPrintOverSSL.
SSL must be set to [On] in SSL Server (SSL Server setting) on page 4-66.
1 Press Z while >ThinPrint On > is displayed. >>ThinPrint
over SSL appears.
2 Press [OK]. A blinking question mark (?) appears.
3 Select On or Off using U or V.
4 Press [OK].
5 Press [MENU]. The display returns to Ready.
Note Thin Print is only supported in Europe (option).
To Next Page
Loading...
