Olivetti d-Copia 163MF

Need help?

Do you have a question about the Olivetti d-Copia 163MF and is the answer not in the manual?

Summary

Safety precautions

Safety warnings and precautions

Defines DANGER, WARNING, CAUTION levels and explains safety symbols used in the manual.

1-1 Specifications

1-1-1 Specifications

Details the main body, printing system, copy sizes, paper types, and other technical specifications.

1-2 Installation

1-2-1 Installation environment

Specifies the required temperature, humidity, power, location, and ventilation for machine installation.

1-2-2 Unpacking and installation

Outlines the step-by-step procedure for unpacking and setting up the printer.

1-3 Service Mode

1-3-1 Service mode

Explains how to print the system configuration page for diagnostics.

1-3-2 Executing service settings

1-3-6 System Settings

1-4 Troubleshooting

1-4-1 Paper misfeed detection

Explains how paper misfeeds are indicated and how to remove jammed paper.

1-4-2 Self-diagnosis

Describes the self-diagnostic function and how error messages are displayed on the operation panel.

1-4-3 Service error message

Lists common service error messages, their contents, causes, and recommended corrective measures.

1-4-5 Service call codes

Provides flowcharts and procedures for diagnosing and resolving specific service call codes like main motor errors.

1-4-14 Error codes (d-Copia164 MF only)

Explains the format of error codes and provides classification and error code tables for the d-Copia164MF.

1-4-16 Image formation problems

Illustrates and explains common image quality issues such as blank printouts, dropouts, and streaks.

1-4-21 Electric problems

Lists electrical problems, their causes, and troubleshooting procedures.

1-4-24 Mechanical problems

Details mechanical issues, their causes, and corrective measures for smooth operation.

1-5 Assembly and Disassembly

1-5-1 Precautions for assembly and disassembly

Outlines essential safety precautions and guidelines before starting disassembly or assembly procedures.

1-5-14 Engine;high voltage PWB and power source PWB

Guides on removing and replacing the engine/high voltage PWB and power source PWB.

1-5-29 Detaching and refitting the main PWB

Details the procedure for removing and replacing the main PWB and its associated components.

1-6 Firmware

1-6-1 Updating the firmware

Explains the procedure for upgrading the machine's firmware via a PC connection.